PLASTIC MATERIALS - PLASTIC MATERIALS

Our company is based above all on the quality of our products, using the best plastic materials on the market.

POLYAMIDE 6.6 is a HYGROSCOPIC resin, therefore, like POLYAMIDE 6, it easily absorbs water from the environment although to a lesser extent, this can be considered an advantage as it allows the product to acquire flexibility and impact resistance.

The main thermoplastics we use are:

POLYAMIDE NYLON 6 Reinforced with 30% glass fibres

-High mechanical resistance

-Abrasion resistance and chemical resistance-UL class self-extinguishing. 94 = HB (happy burning)

-Dielectric strength according to ASTM D149 standards = 21 MV/m

-Water absorption 24h, ASTM D570 standards = 1%

- Continuous operating temperatures 20000 h = 110° -130° C short term = 175° C IEC 216 standards

- Continuous operating temperature without stress according to IEC 85 standards at 20000 h = 155° C class (F)

POLYAMIDE NYLON 6.6 Heat stabilized reinforced with 30% glass fibres

-High mechanical resistance

-Abrasion resistance and chemical resistance

-UL class self-extinguishing. 94 = HB (happy burning).

-Dielectric strength according to IEC 243 standards - 1 = 38 KV/mm

-Water absorption 24 h, ASTM D570 standards = 0.9 %

-Continuous operating temperatures 20000 h = 133° C to 3000 h = 170° C IEC 216 standards

- Continuous operating temperature without stress according to IEC 85 standards at 20000 h = 155° C class (F)

POLYAMIDE NYLON 6. Not reinforced

-Mechanical resistance

-UL class self-extinguishing. 94 = V 2

-Dielectric strength according to ASTM D149 standards =18 MV/m

-Water absorption 24h, ASTM D570 standards = 2.5%

- Continuous operating temperatures 20000 h = 90° C short term = 110° C IEC 216 standards

POLYAMIDE NYLON 6.6. Not reinforced

-Mechanical resistance

-UL class self-extinguishing. 94 = V 2

-Dielectric strength according to ASTM D149 standards = 18 MV/m

-Water absorption 24h, ASTM D570 standards = 0.9%

- Continuous operating temperatures at 20000 h = 90° C short term = 120° C IEC 216 standards

POLYAMIDE NYLON 6. Reinforced with 50% glass fibre

-High mechanical resistance

-UL class self-extinguishing. 94 = HB (happy burning)

-Dielectric strength according to ASTM D149 standards = 22 MV/m

-Water absorption 24h, ASTM D149 standards = 0.75%

- Continuous operating temperatures 20000 h = 130° C short term = 180° C IEC 216 standards

THERMAL INSULATION CLASS

CLASS B = 130° C

CLASS F = 155° C

CLASS H = 180° C

CLASS N = 200° C

CLASS R = 220° C

The technical data sheet of this material is valid only and exclusively for the production of our articles made at CARTOPLAST.

The information contained in the technical documents and in the images have values only indicative  and don't implicate no responsibility from our part.The fitness to the use of our products as regards your specifications or conditions of exercise will be determined only from your preliminary proofs and from the evaluations that you will retain opportune take in consideration .

Cartoplast S.r.l. reserves the right to make variations and/or modifications to the most suitable choice of its reference plastic materials , based on the purchase contracts by its suppliers .